NGPIEPHO010

Outdoor Nature activities

Trail camera - model PIE1028

In stock

83,27 €

Including 0,10 € for ecotax

Average votes for this product
0 / 5
Average : 0 / 5
Based on 0 customers advices.
  • 2 years 2 years
  • NO-GLOW black leds NO-GLOW black leds
  • QVGA - VGA - HD QVGA - VGA - HD
  • 2 MP - 5 MP - 8 MP 2 MP - 5 MP - 8 MP
  • Wide detection angle (PIR): 100 degrees Wide detection angle (PIR): 100 degrees

The PIE1028 trail camera can be used for hunting or wildlife observation, but it can also be used as an alternative to surveillance cameras in warehouses or houses.

The wildlife is less disrupted and the game less scared by the discreet and quiet trail camera than by human presence.

PIE1028 trail camera features

  • Passive infrared sensor (PIR):
    • Wide angle detection: 100 degrees
    • Detection distance: up to 50 feet (15 meters)
    • Adjustable sensitivity: high / medium / low
  • Infrared flash:
    • Range: up to 33 feet (10 meters)
    • 40 invisible LEDS (940 nm)
    • Auto activation in low light conditions
  • Image sensor: 1.3 Mega Pixel CMOS
  • Capture modes:
    • Photo: from 1 to 7 still images per trigger
    • Videos (with audio recording): programmable length from 5 to 60 seconds
    • Photo + Video (with audio recording): the device takes a photo then records a video
  • Image resolution:
    • 2 MP (1920 x 1080)
    • 5 MP (2560 x 1920)
    • 8 MP (3264 x 2448)
  • Video resolution:
    • QVGA (320 x 240)
    • VGA (640 x 480)
    • HD 720P (1280 x 720)
    • Frames per second: programmable (15 or 30)
  • PIR detection mode: the camera will take photos or videos when it is triggered by the PIR sensor's detection of activity in the area it covers
  • Time Lapse mode: the camera will take photos automatically at your choice of intervals during one block of time you set up
  • Imprint on the photos: date, time, temperature (in °C), moon phase, battery level, camera ID (if the user programmed one)
  • External memory support: micro SD memory card up to 32 GB (not supplied)
  • Cycle recording on the memory card:
    • User programmable: ON/OFF
    • When the memory card will be full, the camera will continue to record new photos/videos by deleting the oldest photos/videos.
  • Other functions:
    • Programmable identification number: helps the user to identify from where and from which camera the photos are
    • Programmable password

Reliable and efficient

  • 2-year warranty
  • Weather resistant | IP54
  • Trigger speed: 0.8 second

PIE1028 trail camera specifications

  • Dimensions: 115 x 84 x 54 mm / 4.5 x 3.3 x 2.1 in.
  • Power: 4 x AA alkaline batteries or 4 x AA Ni-MH rechargeable batteries (not supplied) - You can purchase those batteries at any time on this web site.
  • Monochrome LCD screen for settings (1'')
  • Built-in USB port for images/videos download
More

1 trail camera model PIE1028

1 USB cable

1 nylon mounting strap

1 user's guide

Listed below are some useful pointers on how to use your trail camera to get the best results:

  • Mount the camera about 1.5~2 m (5~6 ft) high with the camera pointed at a slight downward angle.
  • Mount the trail camera facing north or south not east or west as the rising ans setting of the sun could produce false triggers and overexposed images.
  • If you're covering a trail, face the camera down or up the trail.
  • Clear out any brush or weeds in front of the trail camera. These can cause false triggers due to temperature and motions disturbances in front of the camera (especially on windy days).
Accessories on sale in the spare parts and batteries store
Same category products