Cellular trail camera – model PIE1078 – 4G

• Field of view: 53°
• PIR sensor (motion detector):
  • Detection angle: 60°
  • Detection distance: up to 65 feet (20 meters)
  • Adjustable detection sensitivity: Low | Medium [ High
• Infrared flash:
  • 6 invisible infrared LED
  • Renge: up to 65 feet (20 meters)
  • Automatic IR Flash (activated according to brightness)
  • Adjustable night mode: a shorter or longer exposure time allows you to extend or reduce the IR flash range
• Photos sent by MMS or E-mail
• Videos sent by E-mail
• Photos and/or videos recipients:
  • You can enter 1, 2, 3 or 4 mobile phone numbers (recipients will only receive MMS and therefore only photos, no videos)
  • You can enter 1, 2, 3 or 4 e-mail addresses (recipients will receive photos and/or videos)
• You can setup and activate the camera remotely thanks to a free mobile app (Android/iOS).
• Free choice of mobile operator for the SIM card
• WARNING: the NUM’AXES SIM card (ref. NGSIM001) is not compatible with the PIE1078 trail camera. The NUM’AXES SIM card does not support MMS.
• When the SIM card is inserted, the camera automatically detects the mobile operator then setup the corresponding MMS/E-mail sending parameters.
• Capture modes:
  • Still images: from 1, 2, 3 or 10 images per trigger
  • Videos with audio recording:
  • Still images + videos with audio recording: a still photo and a video clip are both captured for each trigger
  • Audio recording can be deactivated by user
• Photo resolution:
  • Photos recorded on memory card: 8 MP | 16 MP | 24 MP | 30 MP
  • Photos sent by MMS: 640 x 480
  • Photos sent by E-mail: Small | Large | Original
• Video resolution:
  • Videos recorded on memory card: 480P | HD 720P | FULL HD 1080P | 4K
  • Videos sent by E-mail: 480P
• Video length:
  • Videos recorded on memory card: from 3 seconds up to 3 minutes
  • Videos sent by E-mail: from 3 up to 10 seconds
• PIR detection mode (motion detection): the camera will take photos or videos when triggered by the PIR sensor detecting activity in the area it covers
• Time Lapse mode: the camera will take photos automatically at a user-set time interval. In Time Lapse mode, the PIR sensor is deactivated (there is no motion detection).
• Timer: each day, the device can operate 24 hours a day or only during user-defined time slots. Two operating periods can be programmed.
• Date, time, temperature, moon phase,camera name (if user programmed one), battery level and GPS coordinates can be pirnted on photos
• Memory support: SD card or micro SD card with adapter from 8GB up to 256GB, class 10 minimum (not supplied). You can purchase micro SD cards with adapter from the present website at any time.
• Cycle recording on the memory card:
  • User programmable: ON/OFF
  • When the memory card is full, the camera continues to record new photos/videos by deleting the oldest ones.
• Name of the device: programmable – allows you to identify from where and from which camera the photos are – Very useful if you have several devices
• Password: programmable

Reliable and efficient

• 2-year warranty
• Weather resistant (IP66)
• Trigger speed: approx. 0.1 second

PIE1078 cellular trail camera specifications

• Weight: 440 g (without batteries) – 623 g (with batteries)
• Dimensions: 127,5 x 103 x 79 mm
• Power:
  • 8 x AA batteries (alkaline or Ni-MH rechargeable – not supplied)
  • OR
  • 4 x rechargeable 18650 Li-ion batterires (not supplied)
  • You can purchase these batteries at any time on this website.
• Optional external power supply: 12V power pack or SOL1072 12V solar panel – You can purchase these products at any time on this website.
• 2.4″ color LCD screen: for easy set up and replay photos/videos
• Built-in USB C port for images/videos download (USB C cable supplied)

Listed below are some useful pointers on how to use your trail camera to get the best results

• Mount the camera about 1.5~2 m (5~6 ft) high with the camera pointed at a slight downward angle.
• Mount the trail camera facing north or south, not east or west, as the rising ans setting of the sun could produce false triggers and overexposed images.
• If you’re covering a trail, face the camera down or up the trail.
• Clear out any brush or weeds in front of the trail camera. These can cause false triggers due to temperature and motions disturbances in front of the camera (especially on windy days).
• Check the power level of the batteries.
• Make sure the memory card is properly inserted and have sufficient available space.
• verify time and date are correct.
• Make sure to turn the camera ON before you leave (switch in the ON position).