Cellular trail camera – model PIE1152 – 4G

• Field of view: 60°
• PIR sensor (motion sensor):
  • Detection angle: 60°
  • Detection distance: up to 65 feet (20 meters)
  • Adjustable detection sensitivity: low | medium | high
• Infrared flash:
  • 60 invisible black LED
  • Renge: up to 65 feet (20 meters)
  • Adjustable flash power (high | low)
  • Automatic IR Flash (activated according to brightness)
• Photo sending:
  • by MMS: you can send them to 1, 2, 3 or 4 mobile phone numbers
  • by e-mail: you can send them to 1, 2, 3 or 4 e-mail addresses
• You can setup and activate the camera remotely thanks to a free mobile app (Android/iOS – Name of the application: NumCam)
• When you insert the SIM card, the camera will automatically detect the mobile operator and setup the corresponding sending parameters.
• Capture modes:
  • Still images
  • Videos with audio recording: programmable length from 5 to 59 seconds
  • Still images + videos with audio recording: a still photo and a video clip are both captured for each trigger
• Image resolution: 5 MP | 8 MP | 12 MP | 24 MP | 32 MP
• Video resolution: WVGA | HD 720P | Full HD 1080P
• PIR detection mode (motion detection mode): the camera will take photos or videos when triggered by the PIR sensor (motion sensor) detecting activity in the area it covers
• Time Lapse mode: the camera will take photos or videos automatically at a user-defined interval
• Hybrid mode: motion detection operation + Time Lapse operation at the same time
• Programmable operating periods: each day, the camera can work 24 hours a day or only during user-set time periods
• Date, time, temperature, moon phase, camera name (if user programmed one) and battery level can be pirnted on the photos
• Memory support: SD card or micro SD card with adapter from 8GB up to 128GB, class 10 minimum (not supplied). You can purchase micro SD cards with adapter from the present website at any time.
• Cycle recording on the SD card:
  • User programmable: ON/OFF
  • When the SD card is full, the camera continues to record new photos/videos by deleting the oldest photos/videos.
• Camera name: programmable – allows you to identify from where and from which camera the photos are – Very useful if you have several devices
• Password: programmable

Reliable and efficient

• 2-year warranty
• Weather resistant (IP66)
• Trigger speed: approx. 0.4 seconds

PIE1152 cellular trail camera specifications

• Weight: 302 g (without batteries) – 479 g (with batteries)
• Dimensions:128 x 96 x 76 mm
• Power: 8 x AA batteries (alkaline, lithium or Ni-MH rechargeable – not supplied) – You can purchase batteries at any time on this website.
• Optional external power supply: 12V power pack or 12V solar panel – You can purchase those products at any time on this website.
• 2.4″ color LCD screen: for easy set up and replay photos/videos
• Built-in Type-C USB port for images/videos download

Listed below are some useful pointers on how to use your trail camera to get the best results

• Mount the camera about 1.5~2 m (5~6 ft) high with the camera pointed at a slight downward angle.
• Mount the trail camera facing north or south, not east or west, as the rising ans setting of the sun could produce false triggers and overexposed images.
• If you’re covering a trail, face the camera down or up the trail.
• Clear out any brush or weeds in front of the trail camera. These can cause false triggers due to temperature and motions disturbances in front of the camera (especially on windy days).
• Check the power level of the batteries.
• Make sure the memory card is properly inserted and have sufficient available space.
• verify time and date are correct.
• Make sure to turn the camera ON before you leave (switch in the ON position).